0086-4001-189-180
中文
English
Design documents and resources
Typical application plan
Associated products
HM-BT4502(A)

Bluetooth Low Energy (BLE) Pass-through Module

HM-BT4502(A).png

Product Overview


HM-BT4502 / HM-BT4502A is a wireless data pass-through module based on CMT4502 Bluetooth Low Energy 5.0 chip. By connecting with MCU, it can quickly realize the connection and data communication between the module and Bluetooth devices such as smartphones and tablets. MCU takes up less resource and development is simple.


Module Features


  • Easy to use without any experience in Bluetooth stack application

  • User interface uses universal serial port design, full-duplex two-way communication, minimum baud rate support 9600 bps

  • Default connection interval is 30 millisecond, fast connection

  • Support 2M symbol transmission

  • Support 244 bytes packet transmission

  • Support AT instruction for software reset and get MAC address

  • Support AT instruction to set Bluetooth connection interval and control different forwarding rates (dynamic power adjustment)

  • Support AT instruction to adjust Tx power, modify advertisement interval, customize advertisement data, customize device identification, set data delay (user MCU serial port reception preparation time), modify serial port baud rate, modify module name. All the above parameters are saved after power-down

  • Serial port package length can be any length within 240 bytes (including 240 bytes) (automatic distribution of large packages)

  • Support mobile device APP to modify module name, serial baud rate, product identification code, and customize advertisement content and advertisement period. These settings can be saved after power-down

  • Support mobile device APP to reset module and set Tx power

  • Support mobile device APP to adjust Bluetooth connection interval. The setting can not to be saved after power down

  • Support anti-hijacking password settings, modification and recovery. Prevent malicious third party connections. Users can also not use them

  • Advertisement Content prompt the module real-time system status, including battery power, custom device identification code (suitable for advertisement application)

  • Support internal RTC (real-time clock)

  • Acquired BQB Certification

  • Acquired FCC/CE/IC/SRRC Certification


Electrical Characteristics


  • Working voltage: 1.8V-3.6V

  • Working temperature: - 20℃~+85℃

  • Modulation mode: GFSK (Gaussian Frequency Shift Keying)

  • Modulation frequency: 2402MHz-2480MHz

  • Transient current of receiving data: less than 8mA@3V

  • Transient current of sending data: less than 8mA@3V@0dBm

  • Current in the low power mode: less than 4uA@3V

  • Tx power: - 20dBm ~+8dBm

  • Rx sensitivity: -97dBm


Design documents and resources
Certification & Test Reports:
BLE Module ROHS 2.0
2020-05-18
BLE Module Reach
2020-05-15
Typical application plan
Smart Wear

More
Smart Phone

More
Smart Wear

More
Smart Phone

More
Associated products
Professional RF&SENSOR Designer and Manufacturer
Copyright ©2018 HOPE Microelectronics CO., Ltd. All rights reserved.