One-stop service for pressure sensor Dice and modules
Hope Microelectronics provide the pressure Sensor Dice and modules, The pressure range offered is from 100mbar (10KPa) up to 35bars (3500 KPa), Connecting with Hope's H28 ADC, it mainly used for embedded applications.
Hope also offer the fully temperature compensated and high accuraccy Calibrated barometer sensor modules, and is ideal for applications like pressure controlling systems, movable barometer/altitute meter, weather forecast products, sports watch etc.
If you have interest in our products,please give us feedback or call +86 (0)755 8609 6602.
Application Notes for sensors
|
Pressure Sensor Dice & Module |
 |
 |
Absolute Pressure Sensor
The HSS&HSG Series of Pressure Sensor employed the technique of MEMS (Micro Electromachine System). The Pressure sensors can be delivered as dice, for very small embedded applications. The sensor can even be integrated into another device. The pressure range offered is from 100mbar (10KPa) up to 35bars (3500 KPa), Die sizes is only range from 1 x 1 mm to 1.5 x 1.5 mm. They can be widely used in Automobile Industry, Altimeter, Weather Station, Pneumatic Control, Sphygmomanometer, Industrial Autocontrol, and etc. and also can be designed for customers’ special requirements, and packaged into several styles to expand their capabilities and span ranges.
HSS Series of pressure sensor Dice
HSG Series of pressure sensor Dice
HSS Series of pressure sensor Module
HSG Series of pressure sensor Module
|
Relative pressure sensor
The minimum working range of relative pressure sensor is 2kpa. The design is based on mems and IC technology. HOPE’s product is cheap but with good quality. The technology assures that the PN junction reverse current is less than 10–10A, so that the chip is in small size, high sensitive, good linear and sensitivity, low tcs and super reliable. The product is ideal for pulse measuring, high speed analyzing for small amount material, breath monitoring system, breath machine, pressure switch,environment control, liquid level control,air flow, filtering monitor, HAV fan control and all kinds of leakage detection systems.
HRP01 Relative pressure sensor |
|
Barometer Sensor Module |
 |
|
Humidity Sensor |
 |
|
|
 |
Humidity Sensor
The HH10D relative humidity sensor module is comprised with a capacitive type humidity sensor, a CMOS capacitor to frequency converter and an EEPROM used to holding the calibration factors. Due to the characteristics of capacitor type humidity sensor, the system can respond to humidity change very fast. Each sensor is calibrated twice at two different accurate humidity chambers, two unique sensor related coefficients are stored onto the EEPROM on the module. The data is used for humidity calculation.
|
|
|
16-Bit Analog-to-Digital Converter |
|
|
|
 |
16-Bit Analog-to-Digital Converter
The H28 is a 16 bit Analog-to-Digital Converter (ADC), which employs a delta-sigma conversion technique. With the linear input signal range of 324 mVPP ,，its resolution is 14 bits. In addition to pressure measurement configuration the device can be configured to temperature measurement.
Mainly used to Battery Powered Systems,Low Frequency Measurement Applications,Pressure and Temperature Measurement,Current/Power Consumption Critical Systems,Industrial and Process Control Applications in,Noisy Environments.
|
|
|
Digital Sensor
Print this Page 
Add to Favorites