DATA SHEET
Image shown is for reference only.
Other pin/package combinations may be available.
Add To Cart | Hits:
Hope's RF12B is a single chip, low power, multi-channel FSK transceiver designed for use in applications requiring FCC or ETSI conformance for unl ..
- [Application Notes]: FSK Module Reflow instruction
- [Application Notes]: RF12B programming guide
- [Quality & Environmental]: REACH report for rf modules
- [Quality & Environmental]: ROHS report for rf modules
- [Quality & Environmental]: ETSI test report-RFM12B-868MHz
- [Quality & Environmental]: ETSI test report-RFM12B-434MHz
- [Quality & Environmental]: RFM12B-915MHz FCC report
- [Quality & Environmental]: RFM12B-434MHz FCC report
- [DEMO & Tools]: RF12 Demo Kit User Manual
- [Application Notes]: ANTENNAS APPLICATIONS FOR RF MODULE
Features
- Fully integrated (low BOM, easy design-in)
- No alignment required in production
- Fast-settling, programmable, high-resolution PLL synthesizer
- Fast frequency-hopping capability
- High bit rate (up to 115.2 kbps in digital mode)
- Direct differential antenna input/output
- Integrated power amplifier
- Programmable TX frequency deviation (15 to 240 kHz)
- Programmable RX baseband bandwidth (67 to 400 kHz)
- Analog and digital RSSI outputs
- Automatic frequency control (AFC)
- Data quality detection (DQD)
- Internal data filtering and clock recovery
- RX synchron pattern recognition
- SPI compatible serial control interface
- Clock and reset signals for microcontroller
- 16 bit RX Data FIFO
- Two 8 bit TX data registers
- Low power duty cycle mode
- Standard 10 MHz crystal reference
- Wake-up timer
- 2.2 to 3.8 V supply voltage
- Low power consumption
- Low standby current (0.3µA)
- Supports very short packets (down to 3 bytes)
- Excellent temperature stability of the RF parameters
Related products
| RFM12BP Enhanced Power FSK Transceiver Module |
*Pricing is currently unavailable. Click on the product to see the Product Page for detail information.
